Simplicity A75 Bearing Kit

Description

Simplicity A75 bearing kit.

Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.

In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing.

The bearing on the outside is called the outer bearing.

Used on Simplicity units with 12″ drum brakes including;

• Single axle 1.6  & 2.0 tonne off-road units with 15-16″ rims & 12″ brakes
• Tandem axle 2.5 – 4.0 tonne units with 15 – 16″ rims & 12″ brakes
• NOT used on 4.4 tonne units, for 4.4 tonne units see A75H bearing kit

Simplicity A75 bearings are supplied as either Japanese or German brand bearings, lower quality Chinese or Indian bearings are never supplied in Simplicity bearing kits.

Simplicity A75 bearing kit includes:

• 1 x Bearing – 2788 cone & 2720 cup
• 1 x Set 6 bearing – 67048 cone & 67010 cup (67048/10)
• 1 x Standard seal 1 7/8″ x 3″ x 3/8″
• 1 x Split pin M5 x 50mm zinc

Optional extras:

• 1 x Dust cap A75 59mm