Timken LM (Holden) Bearing Kit

Description

Timken LM (Holden) bearing kit.

Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.

In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing.

The bearing on the outside is called the outer bearing.

LM (Holden bearings) are rated for 750Kg on a 39mm round axle or 1000Kg on a 40mm square axle.

Timken LM bearing kit includes:

• 1 x Set 6 bearing – 67048 cone & 67010 cup (67048/10)
• 1 x Set 2 bearing – 11949 cone & 11910 cup (11949/10)
• 1 x Dust cap 45mm
• 1 x Standard seal 1.437″ – 1.500″ ID x 2.328″ OD x 0.393″ (36.5mm – 38.1mm I.D. x 59.1mm O.D. x 10mm) – [ 1 ]
• 1 x Split pin M4 x 32mm zinc