76L Long Poly Water Tank with Pump PRV80L-P

Description

Enmach 76L poly water tank PRV80L-P.

• Long tank
• Roto moulded polyethylene – Food grade
• 3/4” brass fittings & 2” inlet cap
• Mount kit optional
• Pump included, 4.3L/M, 35 PSI, pressure switched
• Approximate usable storage- 76 Litres
• Size: L x 950mm, W x 220mm, H x 500mm

Filling & Fitting Instructions:

Bolt base plate down with ratchet straps underneath, in line with recessed ribs in tank. Fasten using ratchet straps.

This tank is not to be pressure filled from a hose that is connected from mains pressure to the tank that has a larger flow rate than the breather. Doing so will cause the tank to inflate and split and will void warranty. We recommend to use plastic/nylon fittings in this tank not brass. The stated litre capacity is by cubic measurements and is a guide only. Usable litre capacity is determined by the way the tank is mounted.

TANK MUST BE FLUSHED BEFORE INITIAL USE