80L Slimline Poly Water Tank with Pump PRV80S-P

Description

Enmach 80L poly water tank PRV80-P.

• Slimline tank
• Roto moulded polyethylene – Food grade
• 3/4” brass fittings & 3/8” inlet cap
• Mount kit optional
• Pump included, 4.3L/M, 35 PSI, pressure switched
• Approximate usable storage- 80 Litres
• Size: L x 1080mm, W x 835mm, H x 115mm

Filling & Fitting Instructions:

Drill and bolt mounting angles supplied to tray or chassis at the right width and fix tank to angles using bolts supplied. Fix support bracket to the underside of thank using centre bolts on the mounting angles.

This tank is not to be pressure filled from a hose that is connected from mains pressure to the tank that has a larger flow rate than the breather. Doing so will cause the tank to inflate and split and will void warranty. We recommend to use plastic/nylon fittings in this tank not brass. The stated litre capacity is by cubic measurements and is a guide only. Usable litre capacity is determined by the way the tank is mounted.

TANK MUST BE FLUSHED BEFORE INITIAL USE